4'10 GoldFish

more info

4'10 GoldFish

4'10 GoldFish

$860.00

In stock: 11

Gone Fishing.  

In accordance with the biodynamics of its aquatic namesake, the Goldfish, this fishtail board is short and wide, the nose lifts and the tail dips for maximum buoyancy and front foot drive in bottomless powder, gliding from edge to edge across the rolled hull base, it makes for quick turns to bob and weave between the trees and slash tight pockets.

 

This board is also an excellent carver with taper and radial sidecut along with flax fiber reinforced torsional flex in the tail emulating the twin fin experience.

 

Shape translated from the 5'8 Incut Fish by TrimCraft Surfboards utilizing traditional fish dynamics with a flair for the carve. 

 

Length: 4'10" 
Nose Width: 13 1/3" 
Waist Width: 11 1/4" 
Tail Width: 12"
Turn Radius: R 28'

 

Board Construction:

  • Poplar core
  • PolyUrethane sidewalls
  • Steel edge
  • Sintered base
 



The Taper Collection

More Nose- Less Tail Width.

Increase float in powder, quicker maneuverability. 

Setback inserts.



Tech Details



Camber w/ Early Rise Rocker
Camber for suspension and pump.
Early Rise keeps the nose continuously above the snow. 


Twin-Fin Side Cut

R 26’ | 19' - Fast down the line with quick turn off the tail
 
Hull

A subtle convexity all the way through the base to ease transition from edge to edge.

Fish Tail

Long edge with minimal surface area acts like a fork through soup and sieves snow to drop tail in pow and allow for rapid turns.

SideWalls 
A special combination of PolyUrethane is used for a damp feel to accommodate edge control. 

 

 

 

The Good Ride Review:

 


 

Gone Fishing.  

This fishtail board is short and wide, the nose lifts and the tail dips for maximum buoyancy and front foot drive while gliding from edge to edge. The 4’10 GoldFish makes for quick turns to bob and weave between the trees and slash tight pockets.This board is also an excellent carver with taper and radical sidecut along with flax fiber reinforced torsional flex in the tail emulating the twin fin experience. Learn more about the History of the 4'10 GoldFish snowboard here.

EACH OF OUR SURF CRAFT SNOWBOARDS COME WITH A 5-DAY STOKE GUARANTEE! We want you to find the right board, if for any reason you are not 100% stoked with our boards after your first 5 days of use, you can literally send them back for your money back.

We now offer international shipping to most countries! If you are in the followIng countries: Sweden, Germany, Austria, Switzerland, France and Spain — go to www.goodquestion.de

  • Length:
    4'10" (146 cm)

  • Nose Width:
    13 1/3” (34 cm)

  • Waist Width:
    11 1/4” (29 cm)

  • Tail Width:
    12” (31 cm)

  • Turn Radius:
    R 26’/19’ (7.9/5.8 m)

  • Core:
    Poplar

  • Sidewalls:
    PolyUrethane

  • Edge:
    Steel

  • Base:
    Sintered

  • Effective Edge:
    3'5" (108.5 cm)

  • Stance:
    18" - 20.5" (46 - 52 cm)

  • Sidecut Radius:
    R 26’/19’ (7.9/5.8 m)

  • Camber:
    2.5 mm

The Taper Collection:

  • More Nose- Less Tail width.
  • Increase float in powder, quicker maneuverability.
  • Set-back inserts.

Tech Details:

  • Twin-Fin Side Cut ?
  • Camber w/ Early Rise Rocker ?
  • Hull ?
  • Fish Tail ?
  • SideWalls ?

Customer Reviews

Based on 22 reviews
95%
(21)
5%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Aussie
Pow Fish Extraordinaire

Had the time of my life on a blue bird powder day in mammoth on the Goldie! Handles steep and low angle powder like a DREAM. Plus the groomers are surprisingly fun with some smooth hard carving. A little choppy thru the parts of the mountain that got tracked out. But fresh powder and trees were all time for me! Highly recommend to surfers gone snowboarders and snowboarders looking for a fun pow board that floats you through low angle powder all day long. 🙏🏻💙

A
Alex Hogue
Ripper!

Demo'd this board at Bachelor on a hard-packed morning. It held an edge very well, even at speed. Compared to the RedTail, I did get a bit more chatter on this board, which is to be expected for the shorter length. Would love to see how well this would rip in the powder! Overall, I had a good experience on it. The short length allows you to get funky and creative, while still instilling confidence in what you're doing. I also rode the Minni Fish, and I would say for my size and weight ~5'11" and 160lbs - this was the better board. I'm not a fan of the color of this one, so I wouldn't say it's at the top of my list - but ride wise i'd go on record saying it won't let ya down, it's still a really fun time!

D
David
Snow Surf Stoke

As a regular surfer and sometimes snowboarder, the Goldfish felt intuitive to me. It held an edge quite well in all of the variable spring conditions that I encountered, but where it really shined was in the softer stuff. I was able to lay into turns more deeply and in a way that felt more to me like surfing. Small S turns like pumping down the line and then laying down a big GS heel cutbacks or toe bottom turns. This is the shortest snowboard that I have ever ridden as an adult, and it suited me just fine. Easy to jump turn, and easy to throw the tail and rooster tail some spray. Just a great, carving-centered, all around board for pure fun. Thank you, Aaron, you raised the stoke level to 11!

B
Ben V
Do it!

First off getting ahold of the board to try was such an easy experience, thank you Aaron! I chose to ride at June yesterday on empty groomers and open spring funk tree runs. Firm conditions in the morning meant arcing carves on crispy corduroy and the Goldfish did not disappoint. June is getting low on snow and the grooming had divots and chunky spots all over but it didn't matter, the edge response and hold was excellent. As the day warmed and the snow softened up the Goldfish was effortless to pilot through the trees. Nimble, stable and incredibly free feeling the Goldfish is a board you should try!

G
Guillaume L
A whole new carving experience

Aaron was super nice and let me and my friends demo these boards in mammoth and june over the weekend. It was good early spring conditions but no pow. Even so, the goldfish was one of the most fun carving experiences I've had in a long time. It really facilitates super deep low carves throughout the mountain. I was able to rip down the black diamonds at mammoth and never felt the kind of edge loss I've seen from more flexy rocker boards. It has a real surfy feel like each turn is a big bottom turn on a set wave. I found that switching my bindings to positive-positive was beneficial to get the most out of this board (I usually ride a duck stance). For fun sake, i did test out riding switch and it is possible despite the swallow tail and jumps were still fun in the park but I wouldnt recommend jibbing. I've been looking for a board to add to my quiver and I'm pretty sold on this one. I can't wait to try it out in powder conditions. This is a great board and thanks to Aaron for being so flexible and responsive with these demos! Truly some exceptional customer service!

ready to stoke?

how to select your quiver board

Subscribe

x