We manufacture our boards in small limited batches of 20 per season. Winter '21 Preorders are guaranteed to ship by January 2021. All preorders will receive a code for a free hoody after confirmation of order.

Shape translated from the classic Fish originally created by Steve Lis for South San Diego Count.

 

This short and super wide shape generates tons of speed to stay afloat even in the deepest snow and low-angle terrain.

 

With a gently-hulled base it swivels through the trees and reacts to the slightest weight change, also providing ease of edge to edge ability on piste.

 

Radial camber loads turns and bobs with playful buoyancy up and over bottomless pow.

 

Bonefish logo by Samantha Swartz.

 

Length: 4'10" 
Nose Width: 13 ^3/4" 
Waist Width: 11 ^1/2"  
Tail Width: 12 ^1/2"
Turn Radius: R28'

Board Construction:

• Poplar core
• PolyUrethane sidewalls
• Steel edge
• Sintered base

 

The Taper Collection 

More Nose- Less Tail Width.

Increase float in powder, quicker maneuverability. 

Set-back inserts.

---

Tech Details 

Flat under the back foot.

Camber over the front foot for suspension and pump.

Nose rocker keeps the nose continuously above the snow. 

Twin-Fin Side Cut

R 28’ - even arcing radial turn tapered to initiate off the front foot.

Hull

A subtle convexity all the way through the base to ease transition from edge to edge.

Fish Tail

Long edge with minimal surface area acts like a fork through soup and sieves snow to drop tail in pow and allow for rapid turns.

SideWalls 

A special combination of PolyUrethane is used for a damp feel to accommodate edge control.

 

 

 

We manufacture our boards in small limited batches of 20 per season. Winter '21 Preorders are guaranteed to ship by January 2021. All preorders will receive a code for a free hoody after confirmation of order.

We shape (and are shaped by) Community. 

Gals Shaping Session at @truckeeroundhouse:

From all around the crystal blue waters of Lake Tahoe, gathered a group of folks that may not have interacted since the snow melted in the spring or even recognized each other out of the traditional winter bundling and goggles. In this way it didn't matter if you had actually met each other before- an underlying bond had drawn you to this gathering: the common interest in surfing on snow. 

While this particular session was focused on shaping a board for gal riders, dudes and groms mixed and mingled to share in the experience. 

To kick things off @aaron_sababba presented a brief history of snow sliding theory depicted by examples from the Elevated Quiver. While those concepts soaked in the mingling presided over a healthy spread of snacks and non-alcoholic libations. 

Stage 2: Templates, tape measurers,  and pencils. To account for the large turnout we broke into 2 groups headed up by the gals who quickly got to work expressing their ideas through sketches on masonite. With experience and knowledge flowing in from every direction any possible question was readily answered by peers. 

The Final Act: jigsaws, sanders and the under the arm test.

Once the final curves were etched, @kennygood got to work with the jigsaw to zip em free and sand them down. The shapes were passed around for “under the arm” tests then laid down on the floor and stood upon to gauge boot sizing and visualize the ride. Finally color swaths were passed around and agreed upon a version of pinkish orange which is currently all around the mountains in the form of the blooming Indian Paintbrush flower. 

As the group departed from the shop the air outside felt the first tinge of briskness...  the sure sign that we are Enroute back to winter.

Designed by female and grom riders for an efficient and enjoyable riding experience in powder and on groomers.

Length: 4’6 
Nose Width: 12 ^1/2” 
Waist Width: 10 ^1/2” 
Tail Width: 11"  
Turn Radius: R 28’

Board Construction:

• Poplar core
• PolyUrethane sidewalls
• Steel edge
• Sintered base

Check out the review done by Eat Gold Snow: 

https://www.eatgoldsnow.com/elevated-surf-craft-snowboards/2020/4/8/elevated-surf-craft-minni-fish-review

The Taper Collection

More Nose- Less Tail Width.

Increase float in powder, quicker maneuverability. 

Setback inserts.

Tech Details

Flat under the back foot.

Camber over the front foot for suspension and pump.

Nose rocker keeps the nose continuously above the snow.

Twin-Fin Side Cut

R 28’ - even arcing radial turn tapered to initiate off the front foot.

Hull

A subtle convexity all the way through the base to ease transition from edge to edge.

Fish Tail

Long edge with minimal surface area acts like a fork through soup and sieves snow to drop tail in pow and allow for rapid turns.

SideWalls 

A special combination of PolyUrethane is used for a damp feel to accommodate edge control.

We manufacture our boards in small limited batches of 20 per season. Winter '21 Preorders are guaranteed to ship by January 2021. All preorders will receive a code for a free hoody after confirmation of order.

New for winter 2021: Evolved the dynamics for uphill travel: Posi-Drive Camber and a lightweight carbon construction. 

Shape translated from the 6' Diamond Quad by Seth Cannon Surfcraft utilizing the wide base, flat rocker and rolled hull.

In accordance to the biodynamics of its aerial namesake the Red Tail Hawk, the function of the design provides long swooping turns with the ability for tight tailspins perfect for seeking out the fresh zones from atop the deepest conditions with just enough tail to play with for launch and landing.

Length: 5'1" (~155cm)
Nose Width: 13 ^1/3 " 
Waist Width: 11 ^3/8" 
Tail Width: 12 ^1/2"
Turn Radius: R 30'|20'

Board Construction:

• Poplar core w/ carbon construction
• PolyUrethane sidewalls
• Steel edge
• Sintered base
• Phantom Hercules Hooks

The Taper Collection

More Nose- Less Tail width.

Increase float in powder, quicker maneuverability. 

Set-back inserts.

Tech Details

Flat under the back foot.

Camber over the front foot for suspension and pump.

Nose Rocker keeps the nose continuously above the snow.

Carbon Construction

Carbon strips allow for a lightweight, poppy core

 

Phantom Hercules Hooks

The strongest, yet most simple split-board clip system.

For dependable downhill surfing.

Quad-Fin Side Cut

R 30’|20' - Long swooping drive and sharp adjustments off the tail.

Tapered to initiate off the front foot.

Hull

A subtle convexity all the way through the base to ease transition from edge to edge.

Diamond

Long edge full tail is supportive for launch and landing.

Angle provides pivot for turns.

SideWalls

A special combination of PolyUrethane is used for a damp feel to accommodate edge control.

A performance board For the Groms.

For too long being young in snowboarding equated to being a beginner. But with kids starting to ride younger and younger, by the time they are 8-12 years old the are capable technically and skillfully stylistic to rail carves and charge pow. This board is for these kids - groms - the next generation of snow surfers who are not stuck in the old park twin centric ways or bad habits, rather open to exploration of the mountain wave.

The Micro Driver provides more nose and less tail for efficient powder float, a light posi drive camber provides drive and suspension for the lightweight rider, and progressive sidecut allows precision carvability.

We are offering this board at an extra 10% discounted rate (beyond preorder pricing) for Elevated Families. Reach out to info@elevatedsurfcraft.com for family promo code.

As an effort to help groms who are less financially fortunate we are teamed up with Carving the Future - a non profit providing opportunity to kids to learn to snowboard and will offer the box and to cover shipping of old/outgrown boards to send on to new homes.  Click this link www.carvingthefuture.com for more details on the program.

Length: 4’0 
Nose Width: 10 ^1/4” 
Waist Width: 9^” 
Tail Width: 10^” 
Turn Radius: R 20’|16’ 

Board Construction:

• Poplar core
• PolyUrethane sidewalls
• Steel edge
• Sintered base

Trimline Series

More Tail, Less Nose Width

Narrower nose shaves off grind and initiates the turn off the rear.

Tech Details

We manufacture our boards in small limited batches of 20 per season. Winter '21 Preorders are guaranteed to ship by January 2021. All preorders will receive a code for a free hoody after confirmation of order.

In the Big Board category the Mega Fish acts like its smaller counterpart the GoldFish off the tail but adds a whole lot more nose and extended running length allowing it charge deep pow and big lines.

Length: 5'7" 
Nose Width: 13 ^1/4" 
Waist Width: 10 ^7/8"  
Tail Width: 11 ^7/8"
Turn Radius: R 29'| 26'

Board Construction:

• Poplar core
• PolyUrethane sidewalls
• Steel edge
• Sintered base

 

The Taper Collection 

More Nose- Less Tail Width.

Increase float in powder, quicker maneuverability. 

Set-back inserts.

---

Tech Details 

Blends board shape to match turn shape.

Early Rise keeps the nose continuously above the snow. 

Fish Tail

Long edge with minimal surface area acts like a fork through soup and sieves snow to drop tail in pow and allow for rapid turns.

SideWalls 

A special combination of PolyUrethane is used for a damp feel to accommodate edge control.

 

 

 

We manufacture our boards in small limited batches of 20 per season. Winter '21 Preorders are guaranteed to ship by January 2021. All preorders will receive a code for a free hoody after confirmation of order.

Length: 5'2" 
Nose Width: 12 ^1/2 " 
Waist Width: 10 ^5/8" 
Tail Width: 11 ^3/8"
Turn Radius: R 30'|23'

Board Construction:

• Poplar core 
• PolyUrethane sidewalls
• Steel edge
• Sintered base

The Taper Collection

More Nose- Less Tail width.

Increase float in powder, quicker maneuverability. 

Set-back inserts.

Tech Details

We manufacture our boards in small limited batches of 20 per season. Winter '21 Preorders are guaranteed to ship by January 2021. All preorders will receive a code for a free hoody after confirmation of order.

A splitboard for the petite footed rider (size 5-9) the hawk floats supreme and is a nimble turner- everything you need for ascent to the deep powder rides. 

Length: 4'8" (~142cm)
Nose Width: 12 ^1/4 " 
Waist Width: 10 ^1/2" 
Tail Width: 11 ^1/4"
Turn Radius: R 26'|19'

Board Construction:

• Poplar core
• PolyUrethane sidewalls
• Steel edge
• Sintered base
• Phantom Hercules Hooks

The Taper Collection

More Nose- Less Tail width.

Increase float in powder, quicker maneuverability. 

Set-back inserts.

Tech Details

Posi-Drive Camber

Flat under the back foot.

Camber over the front foot for suspension and pump.

Nose Rocker keeps the nose continuously above the snow.

 

Phantom Hercules Hooks

The strongest, yet most simple split-board clip system.

For dependable downhill surfing.

Quad-Fin Side Cut

R 30’|20' - Long swooping drive and sharp adjustments off the tail.

Tapered to initiate off the front foot.

Diamond

Long edge full tail is supportive for launch and landing.

Angle provides pivot for turns.

SideWalls

A special combination of PolyUrethane is used for a damp feel to accommodate edge control.