5'10 Log

5'10 Log

$880.00

Hang Loose and glide through low angle and deep powder. The 5’10 Log is our experiment with knee high rolling terrain full of laid back style essential for loose hanging trim and drop knee cutbacks.

Design inspired by the classic longboards shaped by Dale Velzy- with a hip in the back and a square tail, this board rocks up under the back bindings for rear foot maneuverability and flat under front foot drive down the line, early rise rocker rolls continuously through the nose.

Paddle out to the outer regions and catch white waves where others only see flat.

Length: 5'10"
Nose Width: 12 3/4"
Waist Width: 11 1/2"
Tail Width: 11 3/4"
Turn Radius: R 45'|8'

Board Construction:

  • Poplar core
  • PolyUrethane sidewalls
  • Steel edge
  • Sintered base

The Taper Collection 

More Nose- Less Tail width.

Increase float in powder, quicker maneuverability. 

Set-back inserts.


 

Tech Details

 


Flat w/  Early Rise Rocker
Planing surface with long rise in the nose and kick under the back foot for lean back turns. 

Dual Side Cut
R 45'|8' - Long trim drive under the front foot and a tight hip out the back for nimble turns.

Square Tail
A short block that pivots off the squared off edge in powder.

SideWalls
A special combination of PolyUrethane is used for a damp feel to accommodate edge control.

Customer Reviews

Based on 1 review Write a review

You may also like

Quick view
5'1 Redtail Hawk
5'1 Redtail Hawk
$820.00 $738.00
Quick view
4'10 GoldFish
4'10 GoldFish
$820.00 $738.00
5'1 Redtail Hawk

5'1 Redtail Hawk

$820.00 $738.00

Shape translated from the 6' Diamond Quad by Seth Cannon Surfcraft utilizing the wide base, flat rocker and rolled hull.

In accordance to the biodynamics of its aerial namesake the Red Tail Hawk, the function of the design provides long swooping turns with the ability for tight tailspins perfect for seeking out the fresh zones from atop the deepest conditions with just enough tail to play with for launch and landing.

Length: 5'1"
Nose Width: 13 1/3"  
Waist Width: 11 3/8" 
Tail Width: 12 1/2"
Turn Radius: R 30'|20'

Board Construction:

  • Poplar core
  • PolyUrethane sidewalls
  • Steel edge
  • Sintered base

The Taper Collection

More Nose- Less Tail width.

Increase float in powder, quicker maneuverability. 

Set-back inserts.


 

Tech Details

 


Flat w/ 
Early Rise Rocker
Blends board shape with turn shape.
Early Rise keeps the nose continuously above the snow. 

Quad-Fin Side Cut
R 30’|20' - Long swooping drive and sharp adjustments off the tail.
Tapered to initiate off the front foot.

Hull

A subtle convexity all the way through the base to ease transition from edge to edge.

Diamond
Long edge full tail is supportive for launch and landing.
Angle provides pivot for turns.

SideWalls
A special combination of PolyUrethane is used for a damp feel to accommodate edge control.

 

 

The Good Ride Review:

Elevated SnowCraft Redtail Hawk 2020 Snowboard Review from thegoodride.com on Vimeo.

 

 

 

 

 

Customer Reviews

Based on 9 reviews Write a review
4'10 GoldFish

4'10 GoldFish

$820.00 $738.00
Gone Fishing.  

 

Shape translated from the 5'8 Incut Fish by TrimCraft Surfboards utilizing traditional fish dynamics with a flair for the carve.


In accordance with the biodynamics of its aquatic namesake, the Goldfish, this fishtail board is short and wide, the nose lifts and the tail dips for maximum buoyancy and front foot drive in bottomless powder, gliding from edge to edge across the rolled hull base, it makes for quick turns to bob and weave between the trees and slash tight pockets.

 

This board is also an excellent carver with taper and radial sidecut along with flax fiber reinforced torsional flex in the tail emulating the twin fin experience.

 

Length: 4'10" 
Nose Width: 13 1/3" 
Waist Width: 11 1/4" 
Tail Width: 12"
Turn Radius: R 28'

 

Board Construction:

  • Poplar core
  • PolyUrethane sidewalls
  • Steel edge
  • Sintered base

 

The Taper Collection

More Nose- Less Tail Width.

Increase float in powder, quicker maneuverability. 

Setback inserts.


Tech Details

Camber w/ Early Rise Rocker
Camber for suspension and pump.
Early Rise keeps the nose continuously above the snow. 

Twin-Fin Side Cut
R 28’ - even arcing radial turn tapered to initiate off the front foot.

Hull

A subtle convexity all the way through the base to ease transition from edge to edge.

Fish Tail

Long edge with minimal surface area acts like a fork through soup and sieves snow to drop tail in pow and allow for rapid turns.

SideWalls 
A special combination of PolyUrethane is used for a damp feel to accommodate edge control.

 

 

The Good Ride Review:

Elevated Goldfish 2020 Snowboard Review from thegoodride.com on Vimeo.

 

 

 

 

 

 

Customer Reviews

Based on 10 reviews Write a review
Back to Taper Collection